Seismic Equipment

Receiver Chains
The XYZ 8/24 8-level, 3-component Receiver 
The multi-level seismic receivers are designed for slim boreholes (min. 46 mm) and are intended for medium range tomographic and VSP surveys
The TC 12/48 Water-Coupled Piezoelectric Transducers
The TC 12/48 consists of four inter-connectable sections of 12 water coupled piezoelectric transducers. They are designed for slim boreholes (min. 46 mm)
Seismic Sources
The SPH 64/54 - Swept Impact Piezoelectric Borehole Sources
These sources are designed for investigation ranges of tens and hundreds meters. The minimum borehole diameter is 56 mm for the SPH-52 and 64 mm for the SPH-64
The MH 64/52 - Mechanical Borehole Sources
MH-64 and MH-52 are water-coupled borehole hammers for small and medium scale cross-hole seismic surveys. The minimum borehole diameter is 56 mm for the MH-52 and 64 mm for the MH-64
The VIBSIST 20/50/1000 Surface Sources
The VIBSIST20 delivers 15-25 J of energy per impact and the mean impact rate is 25/s. The heavier VIBSIST50 produces 30-50 J/impact but the repetition rate is somewhat slower. The VIBSIST1000 produces 800-1200 J/impact at a mean impact rate of 7/s.
High-Resolution Seismic System
The PS-8R High Resolution Seismic System
The system is capable of emitting and receiving frequencies up to 60 kHz. The intended applications are the investigations of mine pillars, bridge piles and tunnel walls, where single fractures and uneven stress distributions may be important for safety.

To contact us:

Phone: +358 9 5630700 

Fax: +358 9 5630800    

Email: calin.cosma@vibrometric.com    

Phone: +1 416 3489199

Fax: +1 416 3480399

Email: nicoleta.enescu@vibrometric.com

Finland


Canada

Home Page | Areas of Expertise & Application Fields | Seismic Services | Crosshole Tomography | Seismic Equipment | Vibrometric projects of the past 7 years | Selected Publications | Multi-offset VSP | Fractured_Reservoir_Characterization 

© VIBROMETRIC, Last updated March 23, 2004